FREE SHIPPING within the CONTINENTAL UNITED STATES on any purchase over $40.

Call us on our toll free number for special shipping rates to Alaska, and Hawaii.

Excludes the large stand-alone vacuum presses such as: FT, F/P, FP/C, F Series, S/P Series, ThermoFoil, Heated/Cold and Custom Vacuum Presses - but ask about special freight allowances on these large format vacuum presses!


HIGH PERFORMANCE PVA WOOD ADHESIVE

PRO-GLUE “HIGH PERFORMANCE” PVA Wood Adhesive: This single component, pre-catalyzed cross-linking polyvinyl acetate adhesive, offers fast cure and HPVA Type II water resistance. It has excellent spreading and layering characteristics with a very rigid glue line, once cured, making it ideal for vacuum laminating veneers or general woodworking.
    Pro-Glue High Performance PVA Wood Adhesive has higher solids content of 68% (normal is 52 to 57%), which prevents bleed through when laminating veneer, is well suited for paper-backed veneer, bent laminations and general woodworking. Larger surfaces can be wetted with multiple thin ‘layers’ of wood glue applied with a foam roller, making the wood adhesive thickness and wetness controllable. At 70°F / 70% RH, there is an open face working time of 10 to 12 minutes before the project needs to be clamped. Some visible adhesive settling in the bottle is normal, so turn or invert bottle to lightly mix prior to application. A warmer curing cycle,such as can be accomplished with our our top of the line Heated/Cold Vacuum Presses and Thermofoil presses, works well with this PVA Wood Adhesive, since the initial attack and set of this adhesive is enhanced and will make a stronger rigid glue line with heat. The press can be warmed by a simple bed heating blanket covered with a reflective or packing blanket which is placed over the clamp jig or vacuum press to assist with the cure cycle. (80° to 90°F ideal)

Applications:

  • Vacuum forming
  • Vacuum laminating
  • Wood forming
  • Wood laminating
  • Wood veneering
  • Veneer Softening
  • forming of curved components,
  • gluing paper backed veneer
  • forming metal overlay products
     

General Performance Guides

  • Spread rate is approx 1 cup per 10 square feet.
  • 75 °F   - 6 hours before unclamping.
  • 90 °F   - 2 hours before unclamping.
  • Full cure is 24-36 hours.

Note:  This water base adhesive will take longer to set and cure in a vacuum press because a closed vacuum bag will slow down the evaporation of moisture.

Click here for “Detailed Instructions”

Click here for product MSDS sheet


 




5 Gal. Pail     $124.95     Quantity      
1Gal. Bottle     $33.50     Quantity      
32 oz with Glue Spreader Tip     $12.70     Quantity      
16 oz with Glue Spreader Tip     $8.65     Quantity      

Due to a recent rate hike by Fed Ex we've been forced to raise our minimum order for free shipping.

FREE SHIPPING within the CONTINENTAL UNITED STATES on any purchase over $40.

Call us on our toll free number for special shipping rates to Alaska, and Hawaii.

Excludes the large stand-alone vacuum presses such as: FT, F/P, FP/C, F Series, S/P Series, ThermoFoil, Heated/Cold and Custom Vacuum Presses - but ask about special freight allowances on these large format vacuum presses!

Vac-U-Clamp    |    Pro-Glue [A division of Vac-U-Clamp]
4149 Avenida de La Plata    |    Oceanside , CA  92056    |   email: sales@vac-u-clamp.com    |    Toll free phone(888) 342-8262    |    Toll free fax (888) 357-4244