FREE SHIPPING within the CONTINENTAL UNITED STATES on any purchase over $40.

Call us on our toll free number for special shipping rates to Alaska, and Hawaii.

Excludes the large stand-alone vacuum presses such as: FT, F/P, FP/C, F Series, S/P Series, ThermoFoil, Heated/Cold and Custom Vacuum Presses - but ask about special freight allowances on these large format vacuum presses!


VENEER BOND DRY UREA RESIN WOOD ADHESIVE - DARK

PRO-GLUE VENEER BOND DRY UREA RESIN WOOD ADHESIVE: This wood glue is a modified pre-catalyzed dry powder urea resin that is prepared by mixing the powder into water. Once cured, it creates an extremely tough, rigid and waterproof glue line, and it is considered one of the choice type of wood laminating adhesives for laminating wood veneers, both exotic or domestic veneer plywood in most manufacturing plants across the Americas and Canada.

Among the many benefits of PRO-GLUE Veneer Bond Wood Adhesive is a cured rigid glue line that can be easily machined without “gumming up” the tools or sandpaper, a hard glue line minimizes “spring back” when laminating curved wood components together, and it can be colored or blended with the light urea resin to make glue lamination lines virtually disappear.  An important characteristic to consider with PRO-GLUE Veneer Bond Wood Adhesive – There are no solvents added, it is EPA compliant for low formaldehyde emissions, has no odor and is ideal for use on woodworking projects in homes, businesses in enclosed areas such as aircraft, yachts or closets where any residual gasses or smell would be objectionable. The glue will cure between 70° and 120° F, but the best cure occurs at 85° to 95° F (Use a simple bed heating blanket if needed). Coverage is approximately 8 sq/ft. per cup of dry resin powder before mixing into water. Use a respirator protection when mixing the fine powder into the water.

See *Detailed directions* for more information.
 

Applications:

  • Veneer Laminating
  • Vacuum forming
  • Vacuum laminating
  • Wood forming
  • Wood laminating
  • Wood veneering
  • forming of curved components,
  • gluing paper backed veneer
  • forming metal overlay products
     

Features:

  • Excellent for gluing solid wood laminations or gluing veneer with hot press, cold press and vacuum presses.
  • Long pot life and open face times.
  • A rigid glue line eleminating “spring back” or joint movement.
  • Fills minor voids in wood joinery and fill gaps in veneer joints.
  • No offensive odors.
  • Low formaldehyde content.
  • Waterproof and heat resistant bonds.
  • 12 month shelf life.
  • Machines and sands without “gumming up” tools or sandpaper.
  • Squeeze through or ‘glue spotting’ through the surface of veneer, sands off easily and will not affect staining or finishing.

General Performance Guides

  • 70° F- Pot Life: 3 hrs, Open time before clamping; 20 min, Clamp time; 12 hrs
  • 80° F- Pot Life:1.5 hrs, Open time before clamping; 15 min, Clamp time; 8 hrs
  • 90° F-   Pot Life: 30 min, Open time before clamping; 8 min, Clamp time; 5 hrs
     

NOTE: Allow 24 hours for complete cure.

Click here for “Detailed Instructions”

Click here for product MSDS sheet




5 Lb Pail     $31.95     Quantity      
25 Lb Tub     $115.95     Quantity      
14 oz     $10.50     Quantity      

Due to a recent rate hike by Fed Ex we've been forced to raise our minimum order for free shipping.

FREE SHIPPING within the CONTINENTAL UNITED STATES on any purchase over $40.

Call us on our toll free number for special shipping rates to Alaska, and Hawaii.

Excludes the large stand-alone vacuum presses such as: FT, F/P, FP/C, F Series, S/P Series, ThermoFoil, Heated/Cold and Custom Vacuum Presses - but ask about special freight allowances on these large format vacuum presses!

Vac-U-Clamp    |    Pro-Glue [A division of Vac-U-Clamp]
4149 Avenida de La Plata    |    Oceanside , CA  92056    |   email: sales@vac-u-clamp.com    |    Toll free phone(888) 342-8262    |    Toll free fax (888) 357-4244